Post by EstimaCore

𝗠𝗼𝘀𝘁 𝗰𝗼𝗻𝘁𝗿𝗮𝗰𝘁𝗼𝗿𝘀 𝗵𝗮𝘃𝗲 𝗻𝗲𝘃𝗲𝗿 𝘀𝗲𝗲𝗻 𝘄𝗵𝗮𝘁 𝗮 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝘁𝗮𝗸𝗲𝗼𝗳𝗳 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗹𝗼𝗼𝗸𝘀 𝗹𝗶𝗸𝗲. Here's what's inside one of ours: DIVISION 03 — CONCRETE Slab-on-grade: calculated volume with 5% waste factor Formwork linear footage per wall type Rebar quantities by diameter and spacing DIVISION 06 — ROUGH CARPENTRY Dimensional lumber — species, grade, and lineal footage Engineered wood products (LVL, I-joists) by span and load Sheathing by square footage with overlap deductions DIVISION 09 — FINISHES Drywall — board count, tape, compound, and fasteners Flooring — net area plus 10% cut waste Paint — gallons per coat, per surface type Plus: MEP rough-ins, insulation, roofing, doors and frames — every division, every line item. Every EstimaCore takeoff is cross-referenced with current supplier pricing across your region, whether you're building in Ontario, Texas, Alberta, or Florida. You get a clean, bid-ready report. No guesswork. No gaps. 💬 What division causes the most pricing headaches on your projects? Tell us below. 🔗 See what a professional takeoff can do for your next bid → estimacore.com #MaterialTakeoff #CSIDivisions #QuantityTakeoff #ConstructionEstimating #Contractors #EstimaCore #CanadaBuilds #USAConstruction