Bellingham, Washington, United States
Professional individual graduated from Embry-Riddle Aeronautical University with Bachelor degree in Aviation Maintenance Science and FAA Airframe & Powerplant Certificate.
• Conduct and return to service 50-hour & 100-hour inspections for Cessna 172, Cessna 206, and Cessna 207. • Conduct annual inspections for Cessna 172, Cessna 206, and Cessna 207. • Perform daily inspection on entire fleet to ensure aircraft safety and airworthiness on the daily basis. • Handle urgent squawks reported by pilot on daily basis to keep aircrafts in service. • Maintain company hangar facility in safe condition and workable manner. • Maintain sufficient aircraft parts ordering, shipping & receiving. • Maintain and keep track of all aircraft permanent records including ADs, STCs, major repairs and alterations.
• Performed and signed off engine and APU changes on Boeing 737 & Airbus A320 family. • Performed landing gear and signed off changes on Boeing 737 & Airbus A320 family. • Accomplished routine and non-routine aircraft systems maintenance items for heavy maintenance C & D checks. • Troubleshot and repaired defects on aircraft hydraulic & pneumatic systems • Assisted with aircraft weigh and balance, towing and handling.
• Performed aircraft interiors removal and installation to facilitate routine inspections. • Performed repairs and alteration on aircraft interiors such as seats, overhead bins, oxygen supply bottles, etc. • Ensured assigned maintenance tasks correctly signed off. • Assisted in removal and installation of airframe parts such as horizontal stabilizers to facilitate ADs. • Assisted in removal and installation of APU.
• Performed servicing on Cessna 172L, Cessna 172SP, Cessna 182T, Piper Cherokee PA 28-140, Piper PA-23-250 Aztec. • Conducted and returned to service 50-hour & 100-hour inspections for Cessna 172L, Cessna 172SP & Cessna 182T. • Repacked, rebuilt & troubleshot landing gear system. • Fabricated appropriate sheet metal & fiberglass composite for aircraft skin repair. • Checked continuity and perform electrical troubleshooting for alternators, relays, voltage regulators & avionics.
• Demonstrate and enforce safety policies in turbine engine lab. • Assist students with overhaul process on Lycoming T-53 turbine engine including disassembly, inspection, and re-assembly. • Sign off overhaul instructions as students proceed to ensure proper procedure being followed. • Supervise shop inventory to keep accurate count of tools.
• Accomplished conformity project for Cessna 182N based on STC, PMA, and aircraft maintenance instructions. • Performed overhaul process on Lycoming O-360-L2A reciprocating engine to continue airworthiness. • Determined parts’ serviceability using precision tools such as dial indicator, micrometers, and Vernier caliper. • Thoroughly inspected all parts within the engine using NDTs like visual, dye penetrant, and magnetic particle. • Complied with Airworthiness Directives and instructions for continued airworthiness during re-assembly. • Performed in-spec spray painting on engine by applying washer primer and enamel. • Tested run engine upon overhaul’s completion to verify proper performance.