Al Khuwair South, Masqaţ, Oman
As a Principal Revit & CAD Design Draftsman with more than 19+ years of professional experience, currently working on North_South_Al Batinah Flood Protection Project [JV between Artelia Passion & Solutions & Renardet SA and Patners LLC] in Oman . Previously from 2018 to 2022 i was working on Mohammad Dam Hydropower Project [JV between MWH-International, Smec, MMP, NESPAK, & ACE] in Pakistan. using Revit 2018 and producing engineering 3D models for this Hydropower Project and finalizing construction drawings for Hydropwer Projects. From 2009 to 2018 I was working on the Neelum Jhelum Hydropower Project [JV between MWH-International, NORPLAN, NESPAK, ACE & NDC] in the Tunnel Section at AJ&K in Pakistan. In 2015 I visited two times Sultunate of Oman for short term assignments for Artelia (French Company). Previously from 2006 to 2009, I worked at AI-Khuwair in Sultanate of Oman with Mls Renardet SA & Partners Consulting Engineers L.L.C, as Senior Draftsman in the Design Section of Roads, Highways, Dams and Heritage works. I am proficient in the following computer software design packages: “REVIT, AutoCAD, SKETCHUP, CIVIL 3D / EAGLE POINT” My experience includes preparing 3D Engineering model Structure models Related to Hydropower, Dams, Tunnels, Buildings, Road and Highways works and Earth ground surface models, creating contours, annotating and designing road horizontal and vertical alignments extract cross-sections, earth work quantity computations, producing AutoCAD drawings and plotting etc. Name: Naveed Arshad Hussain Emai: [email protected] Cell #: 0092-332-4468858 00968-94262615
Alhamdulillah Join Artelia Oman
I am proficient in the following computer software design packages: “REVIT, AutoCAD, SKETCHUP, CIVIL 3D / EAGLE POINT” My experience includes preparing 3D Engineering model Structure models Related to Buildings, Hydropower, Dams, Tunnels, Road and Highways works and Earth ground surface models, creating contours, annotating and designing road horizontal and vertical alignments extract cross-sections, earth work quantity computations, producing AutoCAD drawings and plotting etc.
Responsibilities: I had a pleasure to work with Mr, Jack Mierzejewski (NORPLAN) and Ricarrdo Ammici (NORPLAN) who have been posted as Principal Engineer (Tunnels). I have Prepared all the excavation and construction drawings from inlet to outlet spanning 51km. Preparation of Construction Drawings of Headrace Tunnel Concrete Lining reinforcement and Fault zone areas concrete lining reinforcement. Preparation of Construction Drawings of Softground Tunnel Plan and Profile, Concrete Lining, reinforcement and rock support. Preparation of Construction Drawings of Drill and Blast Tunnel Plan and Profile rock Support and Concrete Lining reinforcement. Preparation of Construction Drawings of different Cross Cuts, Transitions and Junctions at various locations. Preparation of Construction Drawings of TBM Plan and Profiles, TBM Burial Niches, TBM Concrete Lining, TBM Rock Support, TBM Assembly Chambers and TBM Unloading Chambers. Preparation of Construction Drawings of Steel Liner Plan and Profile and Rock Support Preparation of Construction Drawings of Adit Tunnels Plan and Profiles. Preparation of Construction Drawings of Powerhouse, Transformer Hall, Penstocks, Draft Tubes, Drainage Adits, Surge Shaft, Surge Tunnels, V-Notche’s, Water Tank, Drainage Gallery and Buss Bar Tunnels. Preparation of Construction Drawings of Powerhouse Grouting Scheme (Contact grouting, Shallow Grouting and Deep Consolidation Grouting) and Rock Support Drawings, Instrumentation of Powerhouse and Transformer Hall and V-Notch Drawings. Preparation of Construction Drawings of Jhelum Valley Grouting Schemes. Preparation of Construction Drawings of Residence Colony of (NJHPP) The Earth Work, Road Designs, Cut and Fill for the Pavement Preparation of General Layout Plans of (NJHPP), Headrace Tunnel Plan and Profile drawings of 51km of the dual tunnels with Bifurcations, Headrace TBM Tunnel Plan and Profiles.
Project: 969 MW, Neelum Jhelum Hydro Electric Power Plant Client: WAPDA. About project: The Neelum Jhelum Hydropower Plant is part of an under construction run of the river hydroelectric power scheme designed to divert water from the Neelum River to the power station and will have the installed capacity of 969MW. The Power Plant mainly include four generators having rated output of 295 MVA each, 12 + 1 transformers (single phase) with capacity of 98.7 MVA each and 525 KV switchyard having SF6 circuit breakers, double bus bar, breaker-and-a-half scheme and double circuit transmission lines . With 10+ years of working Experience. As a Civil CAD Engineer/ Quantity Surveyor, currently working on 4.7 Billion US Dollars 969MW Neelum Jhelum Hydro-electric Project in Tunnel Section under consortium of MWH Global Int. (USA), NORPLAN (Norway), NESPAK, ACE and NDC (Pakistan) at AJ&K in Pakistan. I have more than Ten (10) years of work experience in highways, tunneling, underground works, concrete lining and estimation of quantities. I am dedicated, hard working, quick learner, self-motivated and keen to join a progressive organization to work with a team of first-rate professionals. During 2006 to 2009, I experienced to work at Al-Khuwair in Sultanate of Oman with M/s Renardet SA & Partners Consulting Engineers L.L.C, as Senior Draftsman in Design Section of Roads, Dams and Heritage works.
I have worked in Roads, Highways, Dam’s Section during this period I worked on several roads, Highways and Dam’s projects under the first rate professionals. For Roads & Highways I used AutoCAD with Eagle Point” softwear. Also I was dealing with Three Surveyors for making Topographical maps and Contouring Maps for the several projects Including the Monuments and Forts. Responsibilities: Roads: Design of Internal Roads and Link Roads following Oman Highway Design Manual. Preparation of Construction Drawings of Hasik–Shuwamiyah (Dul Carriageway) Highway (95km) with all the General and Geometric details. Preparation of Construction Drawings of Quriyat-Sur Road (82km) Dul Carriageway with all the General and Geometric details. Preparation of Construction Drawings of bridges in Quriyat-Sur Road. Design of Roundabouts following Oman Highway Design Manual. Preparation of Construction Drawings of Mahlah – Ghubbrat Al Tam- Ismaiyah Road with all the General Geometric details. Preparation of Construction Drawings Mahlah Misfat Road with all the General and Geometric details. Preparation of Construction Drawings Seh Al Reack Road with all the General and Geometric details. Preparation of Construction Drawings of Al kharjiya Dul Carriageway Road in urban area in Al khuwair with all the General and Geometric details. Preparation of Construction Drawings Maidan Al Faith Road with all the General and Geometric details. Preparation of Construction Drawings Teetam Qaftoot Road with all the General Geometric details. Preparation of Construction Drawings Dhariz Razat Farm Road Sallalah with all the General and Geometric details. Dam’s: Preparation of Construction Drawings, Topographical Maps, Contouring Maps of Al Ansab Dam, Al jafnine Dam, Muscat Dam, Matrah Concrete Dams (06No), Al Awabi Concrete Dam, Wadi Asreen Dam, Wadi Sehna Dam with all details and design Drawings.