Eindhoven, North Brabant, Netherlands
Thesis title: Experimental characterization of an antagonistic shape memory alloy wire actuator for airfoil morphing Shape memory alloy (SMA) is a material with a huge potential. The most well known variant is an alloy of nickel and titanium. It can be used as an actuator due to the shape memory effect. The material can be made into wires that can provide high power density actuation. The unique nature of the actuator makes it a great choice for wing morphing. It is a difficult material to work with however, as it possesses hysteresis and its actuation properties are influenced significantly by as little as 0.1 atomic% difference in the nickel content of the alloy. The actuation cycle of the wire is also not stable. I created a test setup to measure SMA wire actuators. The setup measures actuator force, angle, temperature and the electrical resistance. It sends the sensor data to a pc using using an Arduino Uno. I programmed a data acquisition system using LabVIEW to characterize the SMA wire behavior. The system can also control the actuator by varying the electrical current on the actuator wire. The austenite phase transformation temperature is an important property, as it determines at which temperature the mechanism starts actuating. I demonstrated it is possible to determine phase transformation temperatures using temperature, angle or resistance measurements. The thesis was successfully defended on the 8th of August.
15 EC stage als onderdeel van mijn master Mechanical Engineering. Het hoofddeel van de stage gaat over het ontwerpen van een prototype van een flexibel vleugelprofiel dat wordt vervormd door middel van Shape Memory Alloy draad.
Uitzendkracht voor werktuigbouwkundige projecten.
Het bedrijf had een nieuwe kwaliteits controleur in vaste dienst aangesteld. Mij werd gevraagd hem te ondersteunen voor 8 uur per week, aangezien hij de hoeveelheid werk niet alleen aan kon. Mijn taken waren hetzelfde als in de zomer: - fysieke controlere van binnenkomen goederen - controle van certificaten - archiveren certificaten
Kwaliteitscontrole binnenkomende goederen: - Het beheer van kwaliteitsdocumentatie (ontvangst, beoordeling op juistheid en archivering van materiaalcertificaten en maatprotocollen). - Steekproefsgewijze inspectie van binnenkomende goederen (allerhande staaldelen) - controle a.d.h.v. technische tekeningen en specificaties van afmetingen m.b.v. schuifmaten en kalibers + administratieve afhandeling. - Bij constatering van afwijkingen: inwerkingstelling van de procedure bij afwijkingen --> zelfstandige samenwerking met de afdelingen Engineering en Inkoop. - Aanlevering van kwaliteitsdocumentatie per project aan de Contractsafdeling. extra: Met behulp van Excel een methode ontwikkelen om projectgewijs - producten in de fabriek te controleren - gedane controles bij te houden - controles en bevindingen te presenteren